Solar Impact Sensor, 4-20mA Output Signal, 0-93 watts / sq. ft.Connection Type: Terminal Block, No Display,

Existing reviews

Helpful Product Insight

Wasnt completely sure this would match at first since the appliance suddenly stopped working properly. Thankfully connector alignment matched better than expected and everything is working again.

From: Guest | Date: 7/27/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Helpful Product Insight

After dealing with a situation where the appliance suddenly stopped working properly, we installed this replacement part. Appliance has been running normally since then. Repair turned out easier than expected honestly.

From: Guest | Date: 8/23/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Outcome

Mounting holes lined up correctly during install while replacing the old component because the older unit needed replacement part. Appliance has been running normally since then.

From: Guest | Date: 9/12/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Outcome

Ended up ordering this because the older unit needed replacement part. Had to double check model compatibility first. Cooling performance seems stable again. Repair turned out easier than expected honestly.

From: Guest | Date: 10/30/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews