Protectorelay Oil Burner Control, Controls Oil Burner, Oil Valve and the Ignition Transformer in Response to a Call for Heat, 15 Second Safety Switch Timing, With LED for Lockout Indication and Manual Trip Lever on Safety Switch to Assure Shutdown during servicing, Full Load Contact Ratings: 7.4 Amp @ 120Vac, 3.7 Amp @ 240Vac, Locked Rotor Contact Ratings: 44.4 Amp @ 120Vac, 22.2 Amp @ 240Vac, Pilot Duty Alarm Load Ratings: 75Va @ 120/240Vac, 25Va @ 24Vac, Resistive Alarm Load Ratings: 1.5 Amp @ 120/240Vac, 3 Amp @ 24Vac, -40-130 Degree Temperature Range

Existing reviews

Repair Outcome

Had to double check model compatibility first while replacing the old component because the older unit needed replacement part. Everything powered back on correctly afterward.

From: Peter | Date: 9/29/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Helpful Product Insight

The appliance suddenly stopped working properly on our appliance ended up being caused by a failing part. Had to double check model compatibility first and the replacement solved it.

From: Guest | Date: 11/7/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

Wasnt completely sure this would match at first since the original component had worn out over time. Thankfully access was a little tight behind the panel and everything is working again.

From: Bob | Date: 1/18/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Compatibility Feedback

Access was a little tight behind the panel while replacing the old component because the appliance suddenly stopped working properly. Unit completed a full cycle without issues.

From: Guest | Date: 3/29/2026 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews