Non Spring Return Direct Coupled Actuator, 24Vac, 44 Lb-In Torque, 0/2-10Vdc, 4-20Ma with 500 Ohm Resister, On/Off, SPDT, Floating Control Signal, 95 Second Nominal Drive Time, 0/2-10Vdc Feedback, Declutch Manual Operation, Accepts 1/4"-1/2" Square or 3/8"-5/8" Round Damper Shafts, -5-140 Degree Ambient Temperature Range, 5-95% RH Operating Humidity Range, Includes Mounting Bracket, Screws, Shaft Adapter and Water Tight Strain Relief Cable Fittings

Existing reviews

Helpful Product Insight

Needed basic hand tools only while replacing the old component because the appliance suddenly stopped working properly. Cooling performance seems stable again.

From: Bob | Date: 8/17/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Replacement Observation

The older unit needed replacement part on our appliance ended up being caused by a failing part. Had to double check model compatibility first and the replacement solved it.

From: Peter | Date: 9/15/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Helpful Product Insight

The older unit needed replacement part on our appliance ended up being caused by a failing part. Fitment on our appliance was accurate and the replacement solved it.

From: Guest | Date: 10/8/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

The older unit needed replacement part on our appliance ended up being caused by a failing part. Connector alignment matched better than expected and the replacement solved it.

From: Guest | Date: 1/13/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews