Igniter-Burner, 1/4" Compression Fitting, Non Primary Aerated Combination Pilot Burner and Ignitor, Natural Gas, B Style Mounting Bracket, Single Tip Style, Direction of Front Tip is Front, BCR-18 0.018" Orifice, Includes Special Mounting Bracket with Screws to Convert "B" Bracket to "A" Bracket

Existing reviews

Compatibility Feedback

Access was a little tight behind the panel while replacing the old component because the appliance suddenly stopped working properly. Unit completed a full cycle without issues.

From: Guest | Date: 11/14/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

Had to replace this after our original component had worn out over time. Had to double check model compatibility first. Cooling performance seems stable again. Repair turned out easier than expected honestly.

From: Bob | Date: 12/19/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Repair Outcome

Had to double check model compatibility first while replacing the old component because the older unit needed replacement part. Cooling performance seems stable again.

From: Peter | Date: 3/28/2026 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews