Heater For Type A & B Overload for Cutler Hammer-Eaton Part# FH28

Existing reviews

Compatibility Feedback

Used this replacement after the heating cycle became inconsistent. Mounting holes lined up correctly during install. No leaks or issues noticed so far. Part quality feels reasonable compared to original one.

From: Bob | Date: 7/15/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

The oven temperature was fluctuating badly on our appliance ended up being caused by a failing part. Installation wasnt too difficult overall and the replacement solved it.

From: Peter | Date: 8/13/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

Used this replacement after the heating cycle became inconsistent. Mounting holes lined up correctly during install. No leaks or issues noticed so far. Would probably order again if needed.

From: Guest | Date: 10/5/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

After dealing with a situation where the dryer was no longer heating properly, we installed this replacement part. Appliance has been running normally since then. Packaging was decent and part arrived undamaged.

From: Guest | Date: 2/20/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews