Ultraviolet Flame Detector, Dynamic Self Checking Purple Peeper, 120 or 230vac, 3/4 Inch Mounting, Terminal Block Connections, Nema 4 Rated, -40/175 Degree Ambient Temperature Rating, Used with R7861 Dynamic Self Check Amplifiers, For Use on Combustion Gas, Oil and Other Fuels
Existing reviews
Replacement Observation
4
After dealing with a situation where the older unit needed replacement part, we installed this replacement part. Appliance has been running normally since then. Repair turned out easier than expected honestly.
Guest|7/5/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Replacement Observation
4
Installation wasnt too difficult overall while replacing the old component because the older unit needed replacement part. No leaks or issues noticed so far.
Guest|8/4/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Replacement Observation
4
Used this replacement after the appliance suddenly stopped working properly. Connector alignment matched better than expected. Repair solved the original problem. Packaging was decent and part arrived undamaged.
Bob|11/9/2025 8:36 AM
Was this review helpful?YesNo (0/0)
Repair Note
5
Used this replacement after the older unit needed replacement part. Had to double check model compatibility first. Everything powered back on correctly afterward.
Guest|5/5/2026 9:36 AM
Was this review helpful?YesNo (0/0)
Only registered users can write reviews
DYN.SELF CHK SCANNER 115/230V For Honeywell Part# C7061A1020