General Purpose Switching Relay, 120Vac Coil Rating, DPDT, Full Load Contact Ratings: 3 Amp @ 480Vac, 6 Amp @ 208/240/277Vac, 12 Amp @ 120Vac, Locker Rotor Contact Rating: 18 Amp @ 480Vac, 35 Amp @ 208/240/277 Vac, 60 Amp @ 120Vac, Resistive Contact Rating: 10 Amp @ 480Vac, 20.8 Amp @ 120/208/240/277Vac, Pilot Duty Ratings: Minimum 3 VA @ 24/120Vac & 480Vac, Maximum: 25 VA @ 24Vac, 125 VA @ 120/240Vac and 480Vac, Resistive: 3 Amp @ 277Vac, Powerpile: ( Normally Open Contacts Only ) 0.25 Amp @ 0.25-12Vdc, 1/4" Quick Connect Terminals, -20-150 Degree Temperature Rating
Existing reviews
Replacement Observation
4
After dealing with a situation where the original component had worn out over time, we installed this replacement part. Noise issue disappeared after replacement. Packaging was decent and part arrived undamaged.
Bob|7/22/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Helpful Product Insight
4
Had to replace this after our older unit needed replacement part. Needed basic hand tools only. Noise issue disappeared after replacement. Repair turned out easier than expected honestly.
Guest|8/16/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Repair Note
5
Used this replacement after the older unit needed replacement part. Access was a little tight behind the panel. Cooling performance seems stable again. Part quality feels reasonable compared to original one.
Peter|10/2/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Repair Outcome
5
The older unit needed replacement part on our appliance ended up being caused by a failing part. Took around thirty minutes from start to finish and the replacement solved it.
Guest|3/14/2026 9:36 AM
Was this review helpful?YesNo (0/0)
Only registered users can write reviews
DPDT 120V SWITCHING RELAY 12A. For Honeywell Part# R4222D1013