Non Spring Return Direct Coupled Damper Actuator, 24Vac, On/Off, SPDT,Floating, 70 Lb-In Torque, 180 Second Nominal Drive Time, Feedback with Accessory, 3/8"-1/2" Square or Round Shaft, 20-125 Degree Ambient Temperature, 5-95% RH Operating Humidity Range

Existing reviews

Installation Experience

Took around thirty minutes from start to finish while replacing the old component because the older unit needed replacement part. Appliance has been running normally since then.

From: Guest | Date: 6/24/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Outcome

Had to replace this after our original component had worn out over time. Had to double check model compatibility first. No leaks or issues noticed so far.

From: Guest | Date: 7/18/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

The older unit needed replacement part on our appliance ended up being caused by a failing part. Connector alignment matched better than expected and the replacement solved it.

From: Guest | Date: 8/7/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Compatibility Feedback

After dealing with a situation where the older unit needed replacement part, we installed this replacement part. No leaks or issues noticed so far. Repair turned out easier than expected honestly.

From: Bob | Date: 1/18/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews