Non Spring Return Direct Coupled Damper Actuator, 24Vac, On/Off, SPDT, Floating Control Signal, 180 Second Nominal Driving Time, 35 Lb-In Torque, 3/8"-1/2" Square or Round Shaft, 20-125 Degree Ambient Temperature, 5-95% RH Operating Humidity Range
Existing reviews
Installation Experience
5
Wasnt completely sure this would match at first since the original component had worn out over time. Thankfully access was a little tight behind the panel and everything is working again.
Scotty|9/24/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Compatibility Feedback
5
Picked this up because the appliance suddenly stopped working properly. Mounting holes lined up correctly during install. No leaks or issues noticed so far. Packaging was decent and part arrived undamaged.
Guest|10/25/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Repair Note
4
After dealing with a situation where the original component had worn out over time, we installed this replacement part. Repair solved the original problem. Packaging was decent and part arrived undamaged.
Guest|12/18/2025 8:36 AM
Was this review helpful?YesNo (0/0)
Repair Outcome
4
After dealing with a situation where the older unit needed replacement part, we installed this replacement part. Everything powered back on correctly afterward.
Guest|4/30/2026 9:36 AM
Was this review helpful?YesNo (0/0)
Only registered users can write reviews
DCA,24V,3min,SPDT,NON S/R For Honeywell Part# ML6161A2025