Non Spring Return Direct Coupled Damper Actuator, 24Vac, On/Off, SPDT, Floating Control Signal, 90 Second Nominal Driving Time, 35 Lb-In Torque, 3/8"-1/2" Square or Round Shaft, 20-125 Degree Ambient Temperature, 5-95% RH Operating Humidity Range
Existing reviews
Compatibility Feedback
4
The appliance suddenly stopped working properly on our appliance ended up being caused by a failing part. Needed basic hand tools only and the replacement solved it.
Guest|10/8/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Compatibility Feedback
4
The original component had worn out over time on our appliance ended up being caused by a failing part. Mounting holes lined up correctly during install and the replacement solved it.
Guest|11/10/2025 8:36 AM
Was this review helpful?YesNo (0/0)
Replacement Observation
4
After dealing with a situation where the original component had worn out over time, we installed this replacement part. Unit completed a full cycle without issues. Repair turned out easier than expected honestly.
Guest|11/10/2025 8:36 AM
Was this review helpful?YesNo (0/0)
Installation Experience
5
Picked this up because the original component had worn out over time. Connector alignment matched better than expected. No leaks or issues noticed so far. Repair turned out easier than expected honestly.
Guest|4/6/2026 9:36 AM
Was this review helpful?YesNo (0/0)
Only registered users can write reviews
DCA 24V 35# 90SEC W/DeClutch For Honeywell Part# ML6161B2024