Pneumatic Wall Thermostat, Direct Acting, 1 or 2 Pipe, Single Setpoint, 60-90 Degree Setpoint Temperature Range, 0.011 Scfm Airflow Usage, 5/32" Barb Fittings, Vertical Wall Mount, 2-10 Degree Throttling Range, Bimetal Sensor Element, 25 Psi Maximum Operating Pressure, Includes Cover, Setpoint and Thermometer

Existing reviews

Repair Outcome

The original component had worn out over time on our appliance ended up being caused by a failing part. Mounting holes lined up correctly during install and the replacement solved it.

From: Guest | Date: 6/26/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Compatibility Feedback

After dealing with a situation where the older unit needed replacement part, we installed this replacement part. Cooling performance seems stable again. Part quality feels reasonable compared to original one.

From: Bob | Date: 8/25/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

Fitment on our appliance was accurate while replacing the old component cause the original component had worn out over time. Everything powered back on correctly afterward.

From: Guest | Date: 8/26/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Helpful Product Insight

After dealing with a situation where the original component had worn out over time, we installed this replacement part. Repair solved the original problem. Would probably order again if needed.

From: Peter | Date: 9/14/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews