Pneumatic Thermostat, Heating Applications, 2 Pipe, Single Setpoint, Direct Acting, 15-30 Degree Celsius Setpoint Temperature Range, 1-5 Degree Celsius Throttling Range ( Factory set at 2 ), 0.011 Scfm Airflow Usage, Wall Mount, Bimetal Sensor Element, 25 Psi Maximum Operating Pressure

Existing reviews

Replacement Observation

Took around thirty minutes from start to finish while replacing the old component cause the original component had worn out over time. Noise issue disappeared after replacement.

From: Peter | Date: 7/2/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

After dealing with a situation where the older unit needed replacement part, we installed this replacement part. Repair solved the original problem. Repair turned out easier than expected honestly.

From: Guest | Date: 2/17/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

Took around thirty minutes from start to finish while replacing the old component because the original component had worn out over time. Repair solved the original problem.

From: Guest | Date: 3/4/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

Ended up ordering this because the original component had worn out over time. Mounting holes lined up correctly during install. No leaks or issues noticed so far. Part quality feels reasonable compared to original one.

From: Guest | Date: 3/18/2026 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews