Electronic-Pneumatic Transducer, Used to Convert a Proportional Electric Output Signal from a Controller into a Direct Acting Proportional Pneumatic Signal, Screw Terminals for 14 or 22 Gage Wire, 2-10Vdc Input Signal @ 0.1mA Maximum, 24Vac External Transformer, 0.025 Scfm Airflow Usage, Dual Barb Fittings for 1/4" or 5/32" O.D. Plasting Tubing, 30 Psi Maximum Operating Pressure, 0-18 Psi Pressure Range, 3-15 Psi Output Pressure Range, 0.45Cfm Capacity

Existing reviews

Replacement Observation

After dealing with a situation where the appliance suddenly stopped working properly, we installed this replacement part. Appliance has been running normally since then. Would probably order again if needed.

From: Guest | Date: 7/8/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Replacement Observation

Took around thirty minutes from start to finish while replacing the old component because the original component had worn out over time. Cooling performance seems stable again.

From: Guest | Date: 9/9/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Helpful Product Insight

Wasnt completely sure this would match at first since the original component had worn out over time. Thankfully took around thirty minutes from start to finish and everything is working again.

From: Guest | Date: 10/27/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews