Valve,Zone, 3 Way Diverting, 3/4', Sweat, 24Vac,, 3/4" sweat, 3 way diverting zone valve, 24v, spring return, used in closed loop hydronic systems, 10 pound max close off, brass body, stainless steel stem, brass seat, 18" lead wires, manual opener, 7cv

Existing reviews

Compatibility Feedback

The water flow became inconsistent on our appliance ended up being caused by a failing part. Fitment on our appliance was accurate and the replacement solved it.

From: Guest | Date: 8/3/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

Installation wasnt too difficult overall while replacing the old component because the small leak developed near inlet section. Everything powered back on correctly afterward.

From: Guest | Date: 10/31/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Outcome

Picked this up because the water flow became inconsistent. Had to double check model compatibility first. Repair solved the original problem. Would probably order again if needed.

From: Guest | Date: 12/15/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

Took around thirty minutes from start to finish while replacing the old component because the water flow became inconsistent. Repair solved the original problem.

From: Guest | Date: 3/20/2026 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews