Non Spring Return Direct Coupled Damper Actuator, 24Vac, On/Off, SPDT, Floating Control Signal, 180 Second Nominal Driving Time, 35 Lb-In Torque, 3/8"-1/2" Square or Round Shaft, 20-125 Degree Ambient Temperature, 5-95% RH Operating Humidity Range
Existing reviews
Installation Experience
5
Installation wasnt too difficult overall while replacing the old component because the appliance suddenly stopped working properly. Unit completed a full cycle without issues.
Guest|7/6/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Repair Outcome
5
Connector alignment matched better than expected while replacing the old component because the older unit needed replacement part. Repair solved the original problem.
Guest|12/22/2025 8:36 AM
Was this review helpful?YesNo (0/0)
Compatibility Feedback
4
Access was a little tight behind the panel while replacing the old component because the older unit needed replacement part. Unit completed a full cycle without issues.
Guest|4/7/2026 9:36 AM
Was this review helpful?YesNo (0/0)
Only registered users can write reviews
3 MIN.TIMING W/DECLUTCH For Honeywell Part# ML6161B2073