Pneumatic Damper Actuator, Medium Actuator Force, 2.5-6.5 PSI Spring Range, 2 3/4" Stroke, Spring Return, 29 PSI Maximum Operating Pressure, 6.6 Square Inch Diaphragm, Dual Barbed Fitting for 5/32" or 1/4" OD Tubing Air Connection, -28-160 Degree Temperature Range, 5-95% RH Humidity Range, Actuator Only, 3/8" Threaded Shaft
Existing reviews
Repair Outcome
4
After dealing with a situation where the appliance suddenly stopped working properly, we installed this replacement part. Appliance has been running normally since then.
Guest|8/30/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Repair Outcome
4
Mounting holes lined up correctly during install while replacing the old component because the older unit needed replacement part. Everything powered back on correctly afterward.
Guest|3/31/2026 9:36 AM
Was this review helpful?YesNo (0/0)
Only registered users can write reviews
2.5-6.5# DAMP ACT,ADJ STROKE For Honeywell Part# MP909E1109