Spring Return Direct Coupled Actuator, 0/2-10 Vdc, 4-20Ma with 500 Ohm Resistor, On/Off, SPDT, Floating Control Signal, 24Vac/Dc, 2 Internal Auxiliary Switches, 2-10Vdc Feedback, 88 Lb-In Torque, 90 Second Nominal Driving Time, 20 Second Maximum Spring Return, Nema 2 Rated, Crank for Manual Operation, 3/8"-1.06" Round or 3/8"-11/16" Square Damper Shafts, Self Centering Clamping Adapter, 5-95% RH Non Condensing Operating Humidity Range, -40-140 Degree Temperature Range, Enclosed Screw Terminal Strip

Existing reviews

Helpful Product Insight

Installed this when the original component had worn out over time. Access was a little tight behind the panel. Appliance has been running normally since then.

From: Guest | Date: 12/14/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Helpful Product Insight

The original component had worn out over time on our appliance ended up being caused by a failing part. Connector alignment matched better than expected and the replacement solved it.

From: Guest | Date: 12/22/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Helpful Product Insight

Wasnt completely sure this would match at first since the older unit needed replacement part. Thankfully connector alignment matched better than expected and everything is working again.

From: Peter | Date: 5/3/2026 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews