S20 Series Spring Return Direct Coupled Actuator, 24Vac, 0/2-10 Vdc, 4-20Ma with 500 Ohm Resistor, On/Off, SPDT, Floating Control Signal, 2 Internal Auxiliary Switches, 90 Second Nominal Driving Time, 20 Second Maximum Spring Return, 175 Lb-In Torque, 95 Â± 3 Degree Rotational Stroke, Nema 2 Rated, Manual Operation Crank, 3/8"-1.06" Round or 3/8"-11/16" Square Damper Shafts, Self Centering Clamping Adapter, 5-95% RH Non Condensing Operating Humidity Range, -40-140 Degree Temperature Range

Existing reviews

Helpful Product Insight

The older unit needed replacement part on our appliance ended up being caused by a failing part. Mounting holes lined up correctly during install and the replacement solved it.

From: Guest | Date: 7/2/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Outcome

Wasnt completely sure this would match at first since the appliance suddenly stopped working properly. Thankfully needed basic hand tools only and everything is working again.

From: Guest | Date: 7/12/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

Wasnt completely sure this would match at first since the appliance suddenly stopped working properly. Thankfully installation wasnt too difficult overall and everything is working again.

From: Guest | Date: 7/24/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Compatibility Feedback

Mounting holes lined up correctly during install while replacing the old component cause the original component had worn out over time. Everything powered back on correctly afterward.

From: Guest | Date: 3/6/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews