Non Spring Return Direct Coupled Actuator, 24Vac, 175 Lb-In Torque, Nema 2 Rated, On/Off, SPDT, Floating Control Signal, 2 Internal Auxiliary Switches Manul Declutch Mechanism, 95 ± 3 Degree Rotational Stroke, 95 Second Nominal Drive Timing, 3/8"-11/16" Square or 3/8"-1.06" Round Damper Shafts, -5-140 Degree Ambient Temperature Rating, 5-95%RH Non Condensing Oeprating Humidity Range, Includes Mounting Bracket, Self Centering Shaft Adapter
Existing reviews
Repair Note
5
Fitment on our appliance was accurate while replacing the old component because the older unit needed replacement part. Cooling performance seems stable again.
Guest|7/28/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Installation Experience
5
Mounting holes lined up correctly during install while replacing the old component because the original component had worn out over time. Unit completed a full cycle without issues.
Guest|7/30/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Replacement Observation
5
Took around thirty minutes from start to finish while replacing the old component because the older unit needed replacement part. No leaks or issues noticed so far.
Bob|9/8/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Replacement Observation
4
Wasnt completely sure this would match at first since the older unit needed replacement part. Thankfully had to double check model compatibility first and everything is working again.
Guest|10/28/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Only registered users can write reviews
24V NSR 175inlb 2Pos/Flt 2SW For Honeywell Part# MN6120A1200