Wall Module, Networked Sensor, LonWorks Bus Network Jack, 20 K Ohm NTC Non Linear Sensor Type, White in Color, 55-85 Degree Setpoint Temperature Range, 5-95% RH Non Condensing Operating Humidity Range, Mounts on a Standard 2"x4" Junction Box or on a 60mm Diameter Junction Box, Includes Selectable Setpoint Dials in Fahreheit, Celsius and Relative (- to +) and Lon Jack and Override Button with LED

Existing reviews

Repair Outcome

Mounting holes lined up correctly during install while replacing the old component because the original component had worn out over time. Appliance has been running normally since then.

From: Guest | Date: 10/12/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Replacement Observation

The older unit needed replacement part on our appliance ended up being caused by a failing part. Had to double check model compatibility first and the replacement solved it.

From: Scotty | Date: 12/14/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Compatibility Feedback

Picked this up because the older unit needed replacement part. Mounting holes lined up correctly during install. Cooling performance seems stable again.

From: Guest | Date: 12/20/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Replacement Observation

Had to replace this after our appliance suddenly stopped working properly. Had to double check model compatibility first. Everything powered back on correctly afterward.

From: Guest | Date: 4/4/2026 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews