Pneumatic Heating/Cooling Thermostat, 2 Pipe, Direct Acting Heating , Reverse Acting Cooling, Dual Setpoint, 50-75 Degree Heat Setpoint Temperature Range, 60-90 Degree Setpoint Temperature Range, 18 Psi Heat Changeover, 13 Psi Cool Changeover, 2-10 Degree Throttling Range, 0.011 Scfm Airflow Usage, Wall Mount, Bimetal Sensir Element, 25 Psi Maximum Operating Pressure, Two Concealed Setpoint Knobs, Energy Conservation Model

Existing reviews

Replacement Observation

The original component had worn out over time on our appliance ended up being caused by a failing part. Connector alignment matched better than expected and the replacement solved it.

From: Guest | Date: 10/27/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Compatibility Feedback

After dealing with a situation where the older unit needed replacement part, we installed this replacement part. Appliance has been running normally since then. Would probably order again if needed.

From: Guest | Date: 1/14/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

Took around thirty minutes from start to finish while replacing the old component because the original component had worn out over time. Appliance has been running normally since then.

From: Scotty | Date: 2/19/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews