1HP, 200-230/460 Vac, Three Phase, 1725 RPM, 1 Speed, 3.7-4.0-2.0 Amps, M56H Nema Frame Size, Open Drip Proof, Ball Bearing, Resilient Base, 5/8" x 1 7/8" Shaft, Reversible Rotation, Motor

Existing reviews

Installation Experience

After dealing with a situation where the unit had vibration issue during operation, we installed this replacement part. No leaks or issues noticed so far. Worth verifying model number before ordering though.

From: Bob | Date: 8/19/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Replacement Observation

Wasnt completely sure this would match at first since the unit had vibration issue during operation. Thankfully connector alignment matched better than expected and everything is working again.

From: Scotty | Date: 9/11/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Helpful Product Insight

Installed this when the unit had vibration issue during operation. Access was a little tight behind the panel. Noise issue disappeared after replacement. Would probably order again if needed.

From: Scotty | Date: 10/10/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

Wasnt completely sure this would match at first since the blower motor completely stopped spinning. Thankfully connector alignment matched better than expected and everything is working again.

From: Guest | Date: 11/11/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews