Remote Bulb Controller, Regulates Temperature of Air or Liquids in Ducts, Pipes, Tanks and Boilers, 120Vac or 240/277Vac, 160-260 Degree Setpoint Temperature Range, 280 Degree Maximum Operating Temperature, 3-10 Degree Differential Temperature, 1/2"x4 3/16" Copper Bulb, 20' Capillary Length, 1 SPDT Output, Can be Mounted in any Position
Existing reviews
Helpful Product Insight
4
Connector alignment matched better than expected while replacing the old component because the original component had worn out over time. Everything powered back on correctly afterward.
Guest|6/26/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Repair Note
5
After dealing with a situation where the original component had worn out over time, we installed this replacement part. Cooling performance seems stable again.
Guest|8/8/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Installation Experience
5
The original component had worn out over time on our appliance ended up being caused by a failing part. Had to double check model compatibility first and the replacement solved it.
Guest|4/23/2026 9:36 AM
Was this review helpful?YesNo (0/0)
Repair Note
5
Mounting holes lined up correctly during install while replacing the old component because the original component had worn out over time. Noise issue disappeared after replacement.
Bob|4/30/2026 9:36 AM
Was this review helpful?YesNo (0/0)
Only registered users can write reviews
160/260F 20'CAP SPDT TEMP.CTRL For Honeywell Part# T675A1102