1/5HP, 115 Vac, Single Phase, 1050 RPM, 1 Speed, 6.5 Amps, 42Y Nema Frame Size, Open Drip Proof, Sleeve Bearing, 1/2" x 3 3/4" Shaft, CCW Lead End Rotation, Shaded Pole Motor
Existing reviews
Repair Outcome
5
After dealing with a situation where the unit had vibration issue during operation, we installed this replacement part. Repair solved the original problem. Part quality feels reasonable compared to original one.
Bob|9/23/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Repair Note
4
Had to double check model compatibility first while replacing the old component because the blower motor completely stopped spinning. Everything powered back on correctly afterward.
Guest|10/14/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Helpful Product Insight
5
The blower motor completely stopped spinning on our appliance ended up being caused by a failing part. Needed basic hand tools only and the replacement solved it.
Peter|3/27/2026 9:36 AM
Was this review helpful?YesNo (0/0)
Installation Experience
5
Had to replace this after our dryer started making loud squealing noise. Mounting holes lined up correctly during install. No leaks or issues noticed so far. Worth verifying model number before ordering though.
Guest|4/26/2026 9:36 AM
Was this review helpful?YesNo (0/0)
Only registered users can write reviews
1/5HP 115V 1050RPM 1Spd Motor For Century Motors Part# ONR6026