1/2HP, 208-230 Vac, Single Phase, 1725 RPM, 1 Speed, 2.7 Amps, 48Y Nema Frame Size, Open Drip Proof, Ball Bearing, 1/2" x 3 1/2" Shaft, CW Lead End Rotation, Permanent Split Capacitor Motor

Existing reviews

Repair Note

Used this replacement after the blower motor completely stopped spinning. Needed basic hand tools only. Appliance has been running normally since then. Packaging was decent and part arrived undamaged.

From: Guest | Date: 7/9/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

Wasnt completely sure this would match at first since the dryer started making loud squealing noise. Thankfully mounting holes lined up correctly during install and everything is working again.

From: Guest | Date: 10/19/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

Had to double check model compatibility first while replacing the old component cause the blower motor completely stopped spinning. Noise issue disappeared after replacement.

From: Guest | Date: 12/31/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Replacement Observation

Wasnt completely sure this would match at first since the dryer started making loud squealing noise. Thankfully took around thirty minutes from start to finish and everything is working again.

From: Guest | Date: 1/1/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews