Fast Acting Two Position Actuator, 120Vac, Two Position, SPST Control Signal, 175 Lb-In Torque, 15 Second Nominal Driving Time, 15 Second Maximum Spring Return, 95 ± 3 Degree Rotational Stroke, Nema 2 Rated, Manual Operation Crank, 3/8"-1.06" Round or 3/8-11/16" Square Damper Shaft, Self Centering Clamping Adapter, 5-95% RH Non Condensing Operating Humidity Range, -40-130 Degree Ambient Temperature Range
Existing reviews
Helpful Product Insight
5
Installation wasnt too difficult overall while replacing the old component because the original component had worn out over time. Unit completed a full cycle without issues.
Guest|7/12/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Replacement Observation
5
The original component had worn out over time on our appliance ended up being caused by a failing part. Installation wasnt too difficult overall and the replacement solved it.
Guest|9/17/2025 9:36 AM
Was this review helpful?YesNo (0/0)
Repair Note
4
Installed this when the older unit needed replacement part. Mounting holes lined up correctly during install. Repair solved the original problem. Would probably order again if needed.
Scotty|1/18/2026 8:36 AM
Was this review helpful?YesNo (0/0)
Only registered users can write reviews
120vFireSmoke175#2pos SR Act For Honeywell Part# MS4120F1006