SmartValve, Intermittent Hot Surface Ignition Sequence, 24Vac, 90 Second Ignition Trial Time, Continuous Retry, 1/2 Psi Pressure Rating, 1/8" NPT Pressure Tapping, Standard Two Stage Opening, 1/2"x1/2" NPT, 1.7"wc Low Regulator Setting, 3.2"wc High Regulator Setting, 15 Second PrePurge, Includes LP Conversion Kit, -40-175 Degree Ambient Temperature Range

Existing reviews

Replacement Observation

Wasnt completely sure this would match at first since the older unit needed replacement part. Thankfully access was a little tight behind the panel and everything is working again.

From: Guest | Date: 1/5/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Compatibility Feedback

The older unit needed replacement part on our appliance ended up being caused by a failing part. Had to double check model compatibility first and the replacement solved it.

From: Bob | Date: 2/5/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Repair Outcome

Used this replacement after the older unit needed replacement part. Connector alignment matched better than expected. Cooling performance seems stable again. Part quality feels reasonable compared to original one.

From: Guest | Date: 3/27/2026 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

The original component had worn out over time on our appliance ended up being caused by a failing part. Needed basic hand tools only and the replacement solved it.

From: Peter | Date: 4/16/2026 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews