Pressuretrol Limit Controller, 10-150 PSI Operating Pressure Range, Manual Reset, SPST Switch Breaks on Pressure Rise, Stainless Steel Diaphragm, For use with Oil Applications, 1/4" internal Thread or Surface Mount through back of Case, 120Vac/240Vac

Existing reviews

Repair Note

Access was a little tight behind the panel while replacing the old component because the original component had worn out over time. Cooling performance seems stable again.

From: Guest | Date: 6/27/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Replacement Observation

After dealing with a situation where the original component had worn out over time, we installed this replacement part. Cooling performance seems stable again. Part quality feels reasonable compared to original one.

From: Guest | Date: 8/14/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

Mounting holes lined up correctly during install while replacing the old component because the original component had worn out over time. Cooling performance seems stable again.

From: Guest | Date: 9/22/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

Installation wasnt too difficult overall while replacing the old component because the original component had worn out over time. Everything powered back on correctly afterward.

From: Bob | Date: 4/15/2026 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews