Two Stage Pressure Regulating Gas Valve, 1", 120Vac, 3"-4.5" Water Column High Fire Regulator Setpoints, 3" Water Column Factory Setting, 0.8"-2" Low Fire Regulator Setpoints, 0.7" Water Column Factory Setting, Natural Gas, 300-1000 Cfh Capacity, 3-25 Second Valve Opening Time, 2 Second Maximum Valve CLosing Time, Straight Through, Non Offset, 1/8" Pilot Tapping, 1/2 Psi Pressure Rating, Upright Horizontal Mounting, Slow Opening, Two 5/16" Unf Bleed Tappings, -40-150 Degree Operating Temperature Range, Aluminum Body, 1/4" Spade Terminals with Three 30" Leadwires

Existing reviews

Replacement Observation

Ended up ordering this cause the older unit needed replacement part. Installation wasnt too difficult overall. No leaks or issues noticed so far. Packaging was decent and part arrived undamaged.

From: Guest | Date: 7/25/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

The original component had worn out over time on our appliance ended up being caused by a failing part. Mounting holes lined up correctly during install and the replacement solved it.

From: Peter | Date: 9/24/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Compatibility Feedback

Wasnt completely sure this would match at first since the older unit needed replacement part. Thankfully mounting holes lined up correctly during install and everything is working again.

From: Guest | Date: 10/7/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Outcome

Installed this when the older unit needed replacement part. Had to double check model compatibility first. Noise issue disappeared after replacement. Worth verifying model number before ordering though.

From: Guest | Date: 11/13/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews