Two Stage Pressure Regulating Gas Valve, 1", 120Vac, 3"-4.5" Water Column High Fire Regulator Setpoints, 3.5" Water Column Factory Setting, 0.8"-2" Low Fire Regulator Setpoints, 0.8" Water Column Factory Setting, Natural Gas, 300-1000 Cfh Capacity, 6 Second Maximum Valve Opening Time, 2 Second Maximum Valve CLosing Time, Straight Through, Non Offset, 1/8" Pilot Tapping, 1/2 Psi Pressure Rating, Upright Horizontal Mounting, Slow Opening, Two 5/16" Unf Bleed Tappings, -40-150 Degree Operating Temperature Range, Aluminum Body, 1/4" Spade Terminals with Three 30" Leadwires

Existing reviews

Repair Outcome

Access was a little tight behind the panel while replacing the old component because the appliance suddenly stopped working properly. Repair solved the original problem.

From: Guest | Date: 9/1/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Helpful Product Insight

Fitment on our appliance was accurate while replacing the old component because the appliance suddenly stopped working properly. No leaks or issues noticed so far.

From: Guest | Date: 2/14/2026 8:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

After dealing with a situation where the older unit needed replacement part, we installed this replacement part. Cooling performance seems stable again. Repair turned out easier than expected honestly.

From: Guest | Date: 3/15/2026 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews