Cartridge Globe Valve Actuator, 0/2-10Vdc, 67.5 Lbf Stem Force, 24Vac, 100K Ohm Input Impedance, 1/4" Stroke, Fails in Place, High Force for Metal Seated Valves, Direct or Reverse Acting Switch, For use with 1"-1 1/2" V58xx Series Globe Valves

Existing reviews

Repair Note

Wasnt completely sure this would match at first since the original component had worn out over time. Thankfully connector alignment matched better than expected and everything is working again.

From: Guest | Date: 7/8/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Replacement Observation

Connector alignment matched better than expected while replacing the old component because the original component had worn out over time. No leaks or issues noticed so far.

From: Guest | Date: 7/27/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

Installed this when the original component had worn out over time. Needed basic hand tools only. Cooling performance seems stable again. Part quality feels reasonable compared to original one.

From: Guest | Date: 11/16/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Compatibility Feedback

Wasnt completely sure this would match at first since the older unit needed replacement part. Thankfully mounting holes lined up correctly during install and everything is working again.

From: Guest | Date: 11/19/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews