Duct RH Sensor, 0-10Vdc Output Signal, 0-100% RH (Relative Humidity) Temperature, Adjustable Insertion Depth (3.5 - 8 inches) Probe Length, Connection Type: Terminal Block, No Display,

Existing reviews

Repair Note

Wasnt completely sure this would match at first since the older unit needed replacement part. Thankfully access was a little tight behind the panel and everything is working again.

From: Bob | Date: 10/1/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Outcome

Installed this when the appliance suddenly stopped working properly. Mounting holes lined up correctly during install. Appliance has been running normally since then. Worth verifying model number before ordering though.

From: Guest | Date: 10/19/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Compatibility Feedback

Picked this up because the original component had worn out over time. Connector alignment matched better than expected. Repair solved the original problem.

From: Guest | Date: 4/9/2026 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews