Immersion Temperature Sensor, Ni RTD, 1k Ohm @ 32F (LG-Ni) Output Signal, 0 Degree - 250 Degree Fahrenheit (-18 Degree - 121 Degree Celsius) Temperature, 4 inches (thermowell included) Probe Length, Connection Type: Leads, No Display,

Existing reviews

Compatibility Feedback

The older unit needed replacement part on our appliance ended up being caused by a failing part. Mounting holes lined up correctly during install and the replacement solved it.

From: Guest | Date: 7/18/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Installation Experience

Mounting holes lined up correctly during install while replacing the old component because the original component had worn out over time. Appliance has been running normally since then.

From: Guest | Date: 9/8/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

Took around thirty minutes from start to finish while replacing the old component because the older unit needed replacement part. Repair solved the original problem.

From: Guest | Date: 9/29/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews