Carrier Ge-fan Motor Part# HC39GE472

Fan Motor, 460V, 60HZ, 1PH, 1110RPM, 1/3HP, CW

Weight: 1 lbs. Dimension:

Compatible Models: 48PGNC1260, 48PGEM16D60, 48PGLC1260, 48PGMM16A60, 48PGLC16J60, 48PGDM1260, 48PGDM16B60, 48PGMM16B60, 48PGFC16B60, 48PGEC16M60, 48PGEC16A60, 48PGMM1260, 48PGFM16A60, 48PGFM1460, 48PGMC16M60, 48PGMM16D60, 48PGLM1260, 48PGNM1460, 48PGDC1260, 48PGDM16D60, 48PGLM16J60, 48PGLC16M60, 48PGNM16J60, 48PGFC16D60, 48PGNC1460, 48PGFC1260, 48PGLM16M60, 48PGLM16A60, 48PGNC16A60, 48PGFM16B60, 48PGMM16M60, 48PGFC16A60, 48PGDC16J60, 48PGLC16B60, 48PGEC16B60, 48PGLC1460, 48PGLC16A60, 48PGDM16M60, 48PGNM16M60, 48PGLM1460, 48PGMC1260, 48PGEC1460, 48PGMC16J60, 48PGFC16M60, 48PGMM16J60, 48PGDC16A60, 48PGDC16M60, 48PGLM16K60, 48PGMC16K60, 48PGMC16A60, 48PGLC16D60, 48PGMM16K60, 48PGNM16A60, 48PGMC16B60, 48PGEC16K60, 48PGEM1460, 48PGFM1260, 48PGLM16D60, 48PGFM16M60, 48PGNC16D60, 48PGFM16K60, 48PGDC16D60, 48PGDM1460, 48PGEC16D60, 48PGDM16A60, 48PGNM16D60, 48PGFC16J60, 48PGLC16K60, 48PGDC16B60, 48PGEM16B60, 48PGLM16B60, 48PGNC16B60, 48PGFC1460, 48PGNM16K60, 48PGFM16D60, 48PGEC1260, 48PGMC16D60, 48PGDC16K60, 48PGEM1260, 48PGNM16B60, 48PGNC16K60, 48PGEM16K60, 48PGNC16J60, 48PGEM16A60, 48PGMM1460, 48PGDC1460, 48PGNC16M60, 48PGDM16K60, 48PGMC1460, 48PGEM16M60, 48PGFC16K60, 48PGNM1260, 48PGDM16J60, 48PGEC16J60, 48PGFM16J60, 48PGEM16J60, 48VL060090600, 48VLN060115600, 48VL060115600, 48VLN060130600

Existing reviews

Compatibility Feedback

Had to replace this after our unit had vibration issue during operation. Fitment on our appliance was accurate. Noise issue disappeared after replacement. Worth verifying model number before ordering though.

From: Guest | Date: 8/2/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Outcome

Used this replacement after the blower motor completely stopped spinning. Fitment on our appliance was accurate. Everything powered back on correctly afterward. Would probably order again if needed.

From: Guest | Date: 9/27/2025 9:36 AM

Was this review helpful? Yes No (0/0)

Repair Note

Mounting holes lined up correctly during install while replacing the old component because the dryer started making loud squealing noise. Appliance has been running normally since then.

From: Guest | Date: 12/4/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Compatibility Feedback

Picked this up because the unit had vibration issue during operation. Took around thirty minutes from start to finish. Repair solved the original problem.

From: Guest | Date: 12/31/2025 8:36 AM

Was this review helpful? Yes No (0/0)

Only registered users can write reviews